How will I know if my water is back?

To check if your water is back, turn on the cold kitchen tap. If water is running, your water has been restored from the mains. If there is no flow, please turn off the kitchen tap and check again at regular intervals. If your water hasn’t returned after 24 hours, please contact us on Callsave 1850 278 278 and we will investigate.

My water is discoloured

When your water returns you may notice some slight discolouration of the water. This can usually be cleared by running the tap for a few minutes until the water runs clear. If running your tap does not restore the clear colour, please contact us on Callsave 1850 278 278 and we will ensure it is promptly investigated.

My water is running but pressure is low

When your water returns, it may appear low in pressure at first but it should build back up over time. Please be aware that if pressure is low when the water returns, it may take up to three hours for it to return to normal pressure.

My water is back but my hot tap isn’t working

If your water has returned but your tap is not working you will need to check your system for airlocks. If you’ve already checked for airlocks (followed procedure three times) and the issue isn’t resolved, you will need to contact your local plumber for assistance.

Check for and clear airlocks

My water came back but has gone again

This could be a result of demand on the network. This should resolve itself over time but if there is no resolution within 24 hours please contact us on Callsave 1850 278 278 and we will investigate.

Helpful tips during an interruption to your water supply

If you are notified about a planned water interruption, it is recommended that you fill containers of fresh water to use during the outage.

Do not

  • Drink from the hot water or bathroom taps
  • Use any dishwashers/washing machines or any other equipment dependent on constant water flow while the water is not running from the cold kitchen tap
  • Use any gas, oil or electrical appliances that you will use to heat your water, such as an immersion heater
  • Use central heating systems during the period when the water is off. However, if you are unsure please refer to your manufacturer’s guide or contact your heating service provider


  • Keep taps turned off
  • Try to conserve the water in your storage tank as it may result in an airlock if it empties (e.g. avoid flushing your toilet)

Supply and service updates. View our Supply and Service map for the latest updates in your area. 

Back to the top